Skip to content

How to add a Vulcan chartplotter to any boat

Add a Vulcan chartplotter to any instrument system

Easy to Fit

Fitting a Vulcan chartplotter to your boat couldn’t be easier. There’s a range of mounting options: the included gimbal bracket allows you to mount your chartplotter on any vertical, horizontal or even an overhead surface using just four screws. You can also flush mount it for a low-profile, stylish installation that will suit any boat.

IMG_2093.jpg

Carefully place the mounting template where you plan to mount the unit

IMG_2096-1.jpg

Using a suitable hole-cutter, drill out a radius for the corners

IMG_21001.jpg

Use a saw to join the corners and complete the cutout

IMG_2223.jpg

Fix the Vulcan using the four screws provided, add power and start to enjoy your chartplotter

Easy Integration

Adding Vulcan to your instrument network means you’ll get B&G’s award-winning sailing features. Vulcan is designed for seamless networking via NMEA2000, but you can link it to most existing instrument networks from any brand. Here’s how to do it.

Add Vulcan to a NMEA2000 Network

Simply add a T-piece and drop cable to your NMEA2000 network and plug in your Vulcan, add 12V power and you’re good to go. A network consists of a backbone, from which individual drop cables connect each instrument or device. 12V power is supplied via a power cable, and each end must be terminated using a terminator blank plug. Connections are made using simple Micro-C connectors, which makes building a network as easy as plug and play.

Add Vulcan to NMEA 0183 Instruments

By adding a few simple components that convert NMEA0183 to NMEA2000, you can then add a B&G Vulcan chartplotter to your boat’s instruments. Vulcan chartplotters don’t have a NMEA0183 port, so you’ll need a gateway device such as the Navico AT10 to translate the data coming from your existing sensors to NMEA2000, which can then be read by your new Vulcan chartplotter, as well as any other compatible devices on the NMEA 2000 network. See compatible cables at the bottom of this page.

Add Vulcan to SeaTalk instruments

By adding a few simple components that convert SeaTalk to NMEA2000, you can then add a B&G Vulcan chartplotter to your boat. You’ll need a Seatalk to SeatalkNG converter and a Seatalk to Micro-C connector, which will translate the data coming from your existing ST60 instruments to NMEA2000, which can then be read by your new Vulcan chartplotter. If your instruments are connected via SeatalkNG, all you need is a converter cable to allow your Vulcan to communicate with the network backbone. SeaTalk and Seatalkng are trademarks of Raymarine.

Add Vulcan to B&G Network instruments

You can add Vulcan to legacy B&G Network instruments. By adding a few simple components that convert NMEA0183 to NMEA2000, you can then add a B&G Vulcan chartplotter to your boat and start benefiting from SailSteer™, Sailing Time and other B&G Sailing Features. You’ll need a converter such as the Navico AT10 to convert the B&G Network instruments’ NMEA0183 to NMEA2000. See compatible cables and converters at the bottom of this page.

Dedicated Sailing Features for cruising and racing

Let Vulcan take care of the complex calculations – leaving you free to relax and enjoy the sailing.

sail-steer2.jpg

SailSteer

See all the data you need at a glance on one easy-to-read display with SailSteer. See crucial wind, speed, tide, heading, course over ground, layline and waypoint information, overlaid on one screen to ensure you have the information you need at your fingertips.

Navionics SailSteer Overlay Chart2_EMEA copy.jpg_11717.jpg

Laylines

Let Vulcan do the hard work: See your course and minimise your time spent beating with Laylines overlaid on your chart. See which way is best and ensure you tack in the right place to help you get to windward as efficiently as possible. Laylines even take into account tidal effects and wind shifts to plot the quickest course to the next waypoint.

Navionics Chart with SailSteer page_EMEA.jpg_11716.jpg

SailingTime

Plan effectively with SailingTime and know how long it will take to get to a waypoint, even if it’s dead upwind. SailingTime calculates the time you’ll spend on each tack, taking into account wind and tidal effects, to give you an accurate ETA at your destination.

Startline.jpg

RacePanel

Be on the line when the gun goes with RacePanel. Enjoy easy-to-use features previously only enjoyed by Pro navigators to ensure you get the best start in the fleet, with time, distance and positioning information on a single clear display.

Products in the Vulcan series

7-inch touchscreen sailing chartplotter. ForwardScan™, Broadband Radar™ and autopilot ready
$1,149

9-inch touchscreen sailing chartplotter. ForwardScan™, Broadband Radar™ and autopilot ready.
$1,649

Useful cables and connectors for your Vulcan chartplotter

Latest Blogs from B&G

B&G and the Vendée Globe

Most of the Vendée Globe fleet put their trust in B&G. Find out more about the electronics on board an IMOCA60.

Tom Cunliffe's Tales from the Helm: Vikings

No electronics or even a compass: how the Vikings did it...

Tom Cunliffe's Tales from the Helm: Logbook

Tom Cunliffe spins a yarn - and explains why a paper logbook is still crucial with electronic navigation.

StartLine

The most important part of the race: how to get the perfect start